Overview
2026 Hondapower WB30
Power Equipment
WHEN IT HAS TO FLOW, GO WITH HONDA
Too much water? Slimy sludge? Relax. Honda Pumps are ready to meet the toughest tasks head on. Our complete pump line-up is designed to move liquids quickly, safely, quietly, and easily. With so many models, there’s bound to be one you’re pumped about. Gas-powered Honda pumps are driven by Honda GX Series commercial-grade engines. Legendary for quick starts and rock-solid reliability, these quiet, four-stroke engines deliver impressive performance and fuel efficiency. Teamed with Honda’s innovative designs, exclusive features and rugged durability, they create pumps that keep every job flowing smoothly.
Starting at $749 MSRP
Specs & Features
Specs
Engine
GX160
Displacement
163cc
Bore and stroke
2.7" x 1.8"
Compression Ratio
9.0:1
Oil Alert
Std
Pump Type
Centrifugal, Self-priming
Volute
Rigid Mounted Cast Iron
Impeller
4 Vane Cast Iron
Mechanical Seal (Pump case / impeller)
Silicon Carbide/Silicon Carbide
Priming time
150 sec @16.4 ft.
Drive system
Direct
Discharge capacity
290 gal/min
Suction port diameter
3" NPT
Discharge port diameter
3" NPT
Total head lift
85 ft.
Suction head lift
25 ft.
Maximum pressure
37 psi
Solids handling
N/A
Dimensions (LxWxH)
20.1"x 15.2" x 17.9"
Dry weight
57 lb.
Fuel Capacity
0.82 gal
Run Time @ Max Discharge
1.9 hr
Strainer Part #
78325-YG4-000
Easy starting Honda OHV commercial engine
The durable Honda GX series commercial grade engine is easy starting and provides ample power for the toughest conditions.
Durable silicon carbide mechanical seal
The WB30 features abrasion-resistant silicone-carbide seals for extended wear.
4 vane high efficiency impeller
The WB20's exclusive, Honda-designed 4 vane impeller offers improved performance and high efficiency.
Cast iron volute
The rigid-mount cast iron volute reduces case wear, increasing the life of the pump.
Heavy duty full frame protection
Protects the pump, while offering a convenient tie down location for transport.
Isolation mounted engine and pump
High performance mounts minimize vibration, keeping the pump from “walking" away or “burying" itself in soft soil conditions. The reduced vibration also reduces wear on components, increasing the pump's durability.
Protected by Honda Oil Alert®
Protects the pump by shutting the engine off when low oil is detected.
Large strainer
The strainer allows up to 8 mm (5/16 in.) solids to pass through, helping to prevent clogging.
