Overview
White
Specs and Features
Specification
Engine
GX270
Displacement
270 cc
Bore and stroke
3.0" x 2.3"
Compression Ratio
8.5:1
Oil Alert
Std
Pump Type
Trash Centrifugal Self-priming
Volute
Rigid Mounted Cast Iron w/ Stainless Wear Plate
Impeller
Conical Cast Iron
Mechanical Seal (Pump case / impeller)
Silicon Carbide/Silicon Carbide
Priming time
90 sec. @ 16.4 ft.
Drive system
Direct
Discharge capacity
317 gal/min
Suction port diameter
3"
Discharge port diameter
3"
Total head lift
82 ft.
Suction head lift
26 ft.
Maximum pressure
36 psi
Solids handling
1 1/16 inches
Dimensions (LxWxH)
26.0" x 19.5" x 20.3"
Dry weight
134 lb.
Fuel Capacity
1.4 gal
Run Time @ Max Discharge
1.5 hr
Strainer Part #
78325-YG1-003
Residential Warranty
24 months
Commercial Warranty
12 months
Heavy-duty 3" construction trash pump
Specially designed for job sites and applications where high volume trash water capacity is needed.
Heavy duty full frame protection
Protects the pump, while offering a convenient tie down location for transport.
Replaceable stainless steel wear plate
The volute is equipped with a replaceable stainless steel wear plate, which increases durability and reduces maintenance costs
Durable silicon carbide mechanical seal
Features abrasion-resistant silicone-carbide seals for extended wear.
Isolation mounted engine and pump
High performance mounts minimize vibration, keeping the pump from “walking" away or “burying" itself in soft soil conditions. The reduced vibration also reduces wear on components, increasing the pump's durability.
Protected by Honda Oil Alert®
Protects the pump by shutting the engine off when low oil is detected.
Easy starting Honda OHV commercial engine
The durable Honda GX series commercial grade engine is easy starting and provides ample power for the toughest conditions.
Solid handling capability up to 1 1/16"
The specially designed impeller allows solids to pass through easily, without clogging.
Easy quick clean out port
The WT30 is designed for quick and easy service. An easy access service port makes clean-out quick.
Standard service tool
A convenient multi-tool is provided for easy removal and installation of the pump case, for tightening and removal of the priming plug and drain plug, and for tightening and removal of the hose coupling.
Cast iron volute and impeller
The rigid-mount cast iron volute reduces case wear, increasing the life of the pump.
Unique conical shaped impeller
The unique shape improves priming and higher discharge capacity. Wide vanes are designed to resist wear and maximize durability.
Large heavy duty metal strainer
The strainer allows up to 1 1/16 in. solids to pass through, as well as a large volume of water, helping to prevent clogging. Made of steel to withstand tough conditions.
